Help with this Pioneer 765

D

Dingo Steelwell

New member
I am working on a H&R Pioneer 765 for a friend, and I cant find anything on what I should do to disassemble the bolt itself...
It does not have anything to grab on to, I had to put it in the vise to turn the handle over so the bolt would go back into the gun...
Any help is welcome, thanks guys...
J. D. Steelwell​
 
Ok, so I figured that part out, bolt is now in pieces...
it seems that the firing pin was broken into a few pieces and the firing pin striker is gone compleatly...
I found the parts to replace the broken/missing ones, so no problems there...

one final question, the front sight sits loosly in the dovetail, should I add a dab of glue, or would that be ill advised?

J. D. Steelwell​
 
Slide the front sight out of the dovetail and using a small center punch, center punch the dovetail in a couple of places and reinstall the sight. The center punch moves the metal outward and upward, creating a tighter fit. Some people stake the sight in place but that leaves marks on the outside where it can be seen.
 
You must log in or register to reply here.
Back
Top