E Edmaldo70 Inactive Aug 31, 2018 #1 Hi! I'm new to the forums so I hope this is posted in the right place. I have a CBC 151 single shot 12 gauge. I disassembled the ejector to clean the gunk out but I'm having a hard time reassembling it. Any help would be appreciated. Thanks!
Hi! I'm new to the forums so I hope this is posted in the right place. I have a CBC 151 single shot 12 gauge. I disassembled the ejector to clean the gunk out but I'm having a hard time reassembling it. Any help would be appreciated. Thanks!
D DaleA New member Sep 2, 2018 #2 I have no idea if this will help but here is a schematic of (what might be) your shotgun... https://www.gunpartscorp.com/gun-manufacturer/cbc/braz-single-bbl-cbc Good luck. P.S. We have a "shotgun" section on "The Firing Line" it's titled "The Dave McCracken Memorial Shotgun Forum". This might/might not be useful too. https://legacy.gitbook.com/book/inobtofkunor/cbc-151-12-gauge-owners-manual/details
I have no idea if this will help but here is a schematic of (what might be) your shotgun... https://www.gunpartscorp.com/gun-manufacturer/cbc/braz-single-bbl-cbc Good luck. P.S. We have a "shotgun" section on "The Firing Line" it's titled "The Dave McCracken Memorial Shotgun Forum". This might/might not be useful too. https://legacy.gitbook.com/book/inobtofkunor/cbc-151-12-gauge-owners-manual/details
