Help on changing firing pin in CZ52

S

SouthernShark

New member
I need help on changing out the firing pin on my CZ52. If anyone knows and would be willing to assist me then I would appreciate it.

I already purchased a "manual" from Makarov.com and was greatly dissappointed in it. This "manual" is an idiot book on how to remove the slide and barrel. Basically its a rip off.

Anyway, if anyone could help me then I would appreciate it. I already have a Harrington firing pin and I want to install it. Either email me the instructions, or better yet, post those instructions here so that everyone can see them.


Thank you-


Southern Shark
 
If you are installing a standard replacement firing pin, not competition, it is not difficult.
From: http://www.recguns.com/IIIC2f.html

You may also remove the firing pin, to replace it, or to clean the channel it is in. Push the lock, located toward the rear on the bottom of the slide, all the way up with a punch or similar instrument. This will free the firing pin, and it will slide out the back of the slide.
Click to expand...

Other disassembly and general information can also be found there.

Another source of information: http://www.geocities.com/Yosemite/2997/CZPAGE.html

I hope this helps.

Dave
 
You must log in or register to reply here.
Back
Top