Help choosing a new stock for remington 700

E

erhodes

New member
Hey guys. I am looking for a new stock for my remington 700 with a 26" bull barrel and chambered in 308. Right now it has a boyd's stock on it and will hold at best 1"-1 1/2" groups at 100 yards with hand loads. The current stock has not been bedded or free floated. It is also an ADL.

I have thought about bedding the rifle but I have no idea how to do that and do not know any gunsmiths around here that do that sort of thing. I will be using this for high power matches and some matches where I will have to move quickly to new shooting positions. I am in shape but not looking to lug around a 20+ pound rifle.

I am not really wanting to spend more than $350 -$400 but I figure with that amount I should be able to get something that will get those groups down.

Any help would be much appreciated.
 
I'm sure you'll get many good opinions (in that price range check out Stockystocks.com) but HS Precision or B&C will be your best bets. Keep in mind that B&C have different receiver screw torque settings than the standard 65in. Factory spec on my B&C light tactical is only 35in. Proper torque makes big difference w/r/t accuracy.
 
Simply stated a stock will not improve those groups much.

Now, a barrel will do those groups wonders.

Sending your rifle of to be pillar bedded to a reasonably priced laminate will also improve groups quite a bit. It could also be pillar bedded to the stock you have and be 95% of a bench or tactical stock.

The HS precision will be an improvement, but without bedding, how much 10%....20% maybe...

Good luck. I do my own, do I can't reccomend a smith to send it to.

A quick note on gunsmithing. Gunsmithing is a national occupation. If you find a local guy who says he is super, but is not getting regional or national customers, there's a reason. I would ask here for a name guy in your area, if you care abut that. Then ask him what he has built within the last year. If he has bed a few hunting rifles, who cares. If he can show you groups and trophies, he knows how to do it. I say this because competitors will find him if he makes a winning gun.
 
Simply stated a stock will not improve those groups much.
Click to expand...
If at all. You buy a stock to improve ergonomics, style, weight etc. I've never noted any measurable difference in accuracy even when replacing the cheapest plastic stocks. If the stock is causing poor accuracy it can be corrected with proper fitting to the action. The stock you have has the potential to be as accurate as anything. Glass bedding might help if done right. It is really just improving the fit between action and stock.

On a heavy barreled target rifle where weight is not an issue I prefer the B&C stocks. They do the job just as well as the more expensive stocks. On a hunting rifle where I'm trying to keep weight down then it is McMillan Edge for me. Expensive, but worth the trouble.
 
I'm constantly amazed that people would recommend HS Precision.

I know that this isn't the place for political statements, but HS Precision really, truly offended me in 2008. I'll never knowingly own an HS Precision product.
 
I changed the stock on my Model 700 SPS in .22-250 from the factory tupperware stock to a Bell & Carlson stock with aluminum pillars. At the same time I also changed the Remington trigger that was almost 6 lbs to a Timney trigger set to a smooth 2 lbs.

Shooting hand loads, the combination of the stock and trigger improved the rifle accuracy from 0.662 to 0.419 with 40 grain bullets at 100 yards.

Based upon my experience, I would recommend that you consider changing the trigger when you change the stock.
The trigger was on sale for around $ 80 and the stock was around $250.

The change was well worth the money IMHO.
 
Thanks for the imput guys. The trigger has a 5 pound pull as it sits. I took 100 hand loads, varying the load from lightest to highest charge, and the best of them would stack on top of each other but leave one flyer out of 5 about an inch - 2 inches outside of the group. This could have just been shooter error but it happened consistently with both my father and I shooting. I would say mine is error but my father was a marine corp. marksmanship instructor so I am less likely to believe that it was error on his part.

What would be a good trigger to replace the stock one with? I go with geissele for my ar's but I don't know what a good one would be for this gun..
 
erhodes- I see you are from NC. I live up here in the mountains near Boone and I know of several reputable gunsmiths in a 50 mile radius of me that would glass bed your stock for around 75 dollars and would also adjust your factory trigger down to about 3 lbs. while they had the action out for no extra charge. As far as floating the barrel you could do that yourself with some sandpaper and a dowel rod if bedding didn't take care of it to your liking. Just doing those things would probably help more than any replacement stock you could buy and it would also be a lot cheaper
 
Stephen, if you would pm me a few names that I could look up and contact I would appreciate it. $75 is definitely worth a try.
 
You must log in or register to reply here.
Back
Top