Hammer block rattle on a model 28

[ATTICUS]

The hammer block rattles (when not cocked) on a model 28 S&W that I recently bought. It's kind of annoying but doesn't seem to affect anything. Is it anything to worry about?

 

[JoeHatley]

Nothing to worry about, it's normal. If it really bothers you, a little grease in the sideplate groove it rides in will quiet it. Just don't use too much. The hammer block need to move freely.

Good Luck...

Joe

 

[4V50 Gary]

Perfectly normal for it to rattle. The hammer block is held in place by a groove milled into the sideplate and by a stud projecting from the rebound slide. It's that up/down movement on the stud of the rebound slide that gives you that rattling sound. Time it to music and you won't be bothered.

 

[ATTICUS]

I kinda figured that was the case, but had to ask. A few weeks ago, I took the sideplate off, inspected it (looked fine) and put a touch of Rig on it, but it still rattled. Thanks for the info.

 

[C.R.Sam]

When you get older you won't notice it.
Deaf has some benefits.

Sam

 

[ATTICUS]

Gee thanks Sam....the 28 will probably help me get there a little quicker.