Sheepfarmer
Inactive
Finally got my mag extension in. It was made to hold 4 or 5 extra rounds but I cut it down so it holds 3. I cut it down with a pipe/tube cutter, filed off the burr, shoved a rag down the mag tube on the gun and ground the two "tits" off with a Dremel tool, pulled the rag out thereby cleaning out any metal particles, then oiled it good and mounted the extension. I will have to upload another pic later, but my homemade heat shield is installed too.
Also added a saddle with two Picatinny rails to mount a holographic green/red dot sight on top and another shell holder on the side which carries 5 rounds. So it has 5 00 buckshot on the saddle mount, 5 slugs on the stock mount, 8-#6 birdshot in the mag tube and one in the pipe. Last night I installed an iProtec tactical flashlight with remote pressure switch and a little laser to the side-rail of that. I may install a pumpkin puncher on the mag tube later then that will be it.
Also added a saddle with two Picatinny rails to mount a holographic green/red dot sight on top and another shell holder on the side which carries 5 rounds. So it has 5 00 buckshot on the saddle mount, 5 slugs on the stock mount, 8-#6 birdshot in the mag tube and one in the pipe. Last night I installed an iProtec tactical flashlight with remote pressure switch and a little laser to the side-rail of that. I may install a pumpkin puncher on the mag tube later then that will be it.