Coyote_Buster700
New member
I have a Ruger New Model Convertible (.22Lr and. 22 Mag). I was wanting to see if anyone made aftermarket grips for it. I did a google search and nothing came up.
Grips for a Ruger New Model Convertible.
- Thread starter Coyote_Buster700
- Start date
I am assuming you have a Single Six? Should have the XR3-RED gripframe. Grips that fit the new model Single six and New Model Blackhawk as well as the original Vaquero should fit.
If so there are a lot of after market grip makers. My favorite is Private Shultz Grips
http://www.privatescustomgrips.com/
I also like a guy called 41magnum that post on the different ruger forums
If you are not opposed to shopping on ebay you can find a lot there
Here are mine. The top 2 are from privat shultz and the middle 2 is from 41 magnum
If so there are a lot of after market grip makers. My favorite is Private Shultz Grips
http://www.privatescustomgrips.com/
I also like a guy called 41magnum that post on the different ruger forums
If you are not opposed to shopping on ebay you can find a lot there
Here are mine. The top 2 are from privat shultz and the middle 2 is from 41 magnum
Coyote_Buster700
New member
Those all look F'n sweet. I wasnt sure if the .22 had the same gripframe or not.
38superhero
New member
wow, nice grips...
I am partial to Bear Paw Grips . Fit my hands well.
Example on a couple of my .45 Flattop Convertibles :
Example on a couple of my .45 Flattop Convertibles :
Walklightly
Moderator
You guys display your gun's like whore's, but, they are sexy! Carry on.
TBS, don't let me get my hands on them.
TBS, don't let me get my hands on them.
A +1 for Carl "Private" Schultz' grips. I have several sets of his--American hollys, walnut and ebony--all excellent.
A little known factoid, in the Ruger store (www.shopruger.com) a set of "black" (silver-black) laminates has been mis-described from the start, to paraphrase, "for Single Six with 10" barrel and square back triggerguard only" -- a gun configuration that doesn't exist. The grips however ARE legit for regular XR3-Red (Single Six, Vaquero, Blackhawk) application.
A little known factoid, in the Ruger store (www.shopruger.com) a set of "black" (silver-black) laminates has been mis-described from the start, to paraphrase, "for Single Six with 10" barrel and square back triggerguard only" -- a gun configuration that doesn't exist. The grips however ARE legit for regular XR3-Red (Single Six, Vaquero, Blackhawk) application.
Last edited:
madcratebuilder
New member
Walklightly said:
It's just a little gun ****.
I just scored a NMB .357/9mm convertible last night. I'll post some **** as soom as it's cleaned.
Walklightly
Moderator
All I got to say is *********************************,**************