Got my Squirrel Daddy Jig today

[Toddrod505]

Mail man dropped off my Squuirrel Daddy Jig for cutting .223 brass for 300 blk cartridges.
https://www.dropbox.com/s/0ta2cn25r0bq67e/2015-04-10%2018.35.35.jpg?dl=0https://www.dropbox.com/s/c044xcmls21f7qw/2015-04-10%2018.35.51.jpg?dl=0

 

[flashhole]

I picked up a similar system from reloadimizer on eBay. The jig does 300 Blackout and 221 Fireball from 223 brass. I bought it for 221 Fireball. I bought the stabilizer bar too.

You can see the setup I have here. http://www.ebay.com/itm/131117872389?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT

The saw I bought separately on eBay. It's marketed by Drill Master. Turns at 10,600 rpm. Does a really clean job cutting the brass.

Enjoy and post a pic of your loads.

 

[flashhole]

I plan to mount mine on a piece of wood to serve as a base/stabilizer. If the wood base is 3/4" thick I can use a catch bin at the end of the jig to catch the brass.

 

[jmorris]

I made an automated machine that will cut thousands and hour as long as you keep cases in the collator.

https://www.youtube.com/watch?v=iNXz97yWp2w

 

[flashhole]

Now that is slick. You must have a lot of time on your hands. Great job.

 

[Toddrod505]

Jmorris that is sick as hell

 

[Handloader109]

Oh, BTW, harbor freight still carries the saw.....