FP-10 or Corrosion "X" as the best CLP?: Opinions please?

B

boa2

New member
FP-10 versus Corrosion "X": Which is the best CLP? Which is the best at "C:, at "L", and at "P"?

Please offer any experiences that you have had with the above products(Or, any factual test data(Or, links?)that you might have)? Opinions are welcome also?
 
To be honest, I haven't found a lubricant that beats Remoil. I use Rennaisance wax for exterior protection. I use Flitz for nickel and stainless. I polish my blued firearms with Kiwi Parade gloss wax in black. I use Johnsons paste wax on wood grips. I use plain old Turtle Wax on my stored firearms, carnauba is good stuff. I don't buy fancy stuff with new and improved in their advertising. I do admit that I use a few Teflon sprays and grease.
 
Corrosion tests I've seen usually end up with Breakfree on top.

As far as being a cleaner, I guess it's ok. If you buy the solvent separate, it's one of the best powder solvents I've used. In solution, it actually aids the corrosion protection by thinning the oil and letting it penetrate and cover better. It will also do a decent job cleaning but not like a dedicated cleaner.

Lubrication? That's the easy part--most any decent gun oil will do a more than sufficient job.
 
You must log in or register to reply here.
Back
Top