"Fit it yourself" match barrels

M

md2lgyk

New member
Have seen ads for a Kart .45 match barrel/bushing designed for the "do-it-yourselfer" to fit. Does anyone have experience with this product? Is it as simple as the ads imply? I'm no gunsmith, but not a klutz either. Thanks.

md2lgyk
 
Md2lgyk, most drop-in bbls will require some fitting. It the case of most 1911 bbls the hood and bottom lug or "feet" may require some attention. The work can be done with files and there should be complete instructions with the new barrel. George
 
I left out the bushing. I think you'll find that while it is fit to the barrel it may require fitting to your slide. Either turned down on the OD or opening the rear for snug fit. George
 
Thanks for the input. This particular Kart barrel is supposedly designed for the "do-it-yourselfer" to fit, and Kart sells an installation kit with files and a couple of measuring/fitting blocks. The bushing is supposed to be already fitted to the barrel. What I was worried about was what you mention - fitting the bushing to the slide. Without some directions I wouldn't know where to start filing.
 
You must log in or register to reply here.
Back
Top