First Batch

S

Schlitz 45

New member
Decided to give reloading a try. I've started shooting a 45Colt revolver and prefer jacketed bullets that run anywhere from $32 to $40 for a box a fifty around here. So the cost, easy size cases to work with, along with the fact that I'm pushing the empties right into my hand made it seem like the logical thing to do. just starting out with the bare necessities as my space is somewhat limited. A Lee hand press & dies, inexpensive but accurate scale, a pound of powder, some primers & I'm in business. It was fun rolling my own & I didn't find it tedious at all-as long as I keep to a hundred or so at a time this will work well for me.
7l8e3Dol.jpg
 
Last edited:
Congratulations, welcome to the club.

Straight case pistol is a good one to start with.

I got going with one of the "You Pound It" Lee kits (which didn't work that well) - nothing against Lee, just not a great setup. I have their dies in 41 magnum and 44 special.

Hand press looks like it would have been better way to go. Not sure if they didn't have them or I just didn't know about them, long time ago.

I loaded a lot of 44 and 41 magnum on a single state RCBS Junior in a tiny closet that was my reloading bench in a 10 foot camping trailer. Several thousand rounds out of that setup.
 
Fantastic way to start! Starting small for exactly what you need leads to faster learning I believe. If you add more gear you will know from experience exactly why you want/need that item and what you expect to gain from it.

And I agree that straightwall handgun cartridge is the easy way to start reloading. Not as much case prep needed and very simple. Bottleneck rifle cartridges get into trimming, lubing and such.

Have fun with those handloads! And if you don't have a hardcopy manual I would recommend it to learn more about the process and tools and some of the "whys".You are off to a good start.
 
Good for you, and welcome to reloading!

I started off with one of the Lee puond it sets for 7mm Rem Mag. Still have it.
Wife told me she was tired of hearing me hammer all the time. So now i have the Lee 4hole turret press.

One thing though..

You do know that the Berry's are actually plated, not jacketed.
Some will argue same same.
I always wondered that if they are the same why are there different loads between them.
 
Nice job on your first batch!

I love the 45 Colt, maybe my all time favorite cartridge. It's so versatile, it can be loaded from mouse farts to the king of the jungle, (in the right gun) and everything in between.

Don't be afraid to try some lead bullets as the Colt was literally made for them and does very well with them. I like the newer coated lead bullets myself which remove direct exposure to lead that concerns some folks and also means you don't have worry about bullet lube falling off during shipping and such.

Have fun.
 
Manufacturing, physics, chemistry, cheaper&better, and BOOMs (at the range of course)! What's not to like?

I really like Berry's plated bullets, too. I shoot a lot of cast lead, very few jacketed, but also a LOT of Berry's in different calibers. They are very consistent quality and they seem thicker plated than Rainier (or maybe I am less ham handed than years gone by). Now they even sell jacketed 55 gr .224" bullets.
 
You must log in or register to reply here.
Back
Top