After many months of pondering and wishing and hoping, I finally cleaned up the floor, temporary refinish until funds allow for a better job, and assembled my Rural King workbench. Pardon the terrible paint job...I couldn’t afford to do that, either, so I’ll have to live with it for now. Perhaps I’ll change everything over to Lyman so it all blends in well. For now, I believe I have room to mount my Hornady LnL Classic, as well as my new Lyman All American 8 turret. So pleased with the height of this bench, too. Maybe this will be easier on my back.
Finally Assembled my New Loading Bench
- Thread starter markr6754
- Start date
Yes...I mean the wall. I’m thinking about adding a coat or two of polyurethane for protection. The wood surface appears to be freshly sanded, but no surface protection of any kind. If I remember right, the Harbor Freight bench has a light finish. I put several coats on the plywood I used for my B&D WorkMate conversion and I’ve never regretted it. Spilled powder slides right off, and no splinters.
My wife got me the Harbor Freight metal bench with the pegboard backing & LED light when i first moved to the basement. She was tired of my Lee Wack-A-Mole loading on the dinning room table. 
I added a piece of 5/8 plywood to the particle board top. Routed 2 grooves for the spent primers from my Lee 4 hole Turret press to be caught.
My old work had a kiosk that was no longer being serviced, so i snagged the computer and touch flat screen monitor, and mounted to the pegboard.
QL, and many reloading manuals are just a click away. Along with TFL, of course!
I added a piece of 5/8 plywood to the particle board top. Routed 2 grooves for the spent primers from my Lee 4 hole Turret press to be caught.
My old work had a kiosk that was no longer being serviced, so i snagged the computer and touch flat screen monitor, and mounted to the pegboard.
QL, and many reloading manuals are just a click away. Along with TFL, of course!
Beautiful wood, and I am sure you will want to protect it. Cedar is a very soft wood and I would recommend either spar varnish which is very tough but oil based. If the fumes from oil based is a problem then use several coats of a water based poly. I also put a piece of clear carpet runner on mine.
Great ideas. I’ve been very pleased with the durability of the coating I put on my plywood WorkMate surface. I applied 3 coats with light sanding between coats, both to protect the wood, but to also ensure my loading was splinter free. It’s worked beautifully. I may just keep that station intact.
I’m not so worried about splinters from the new bench as I am about keeping everything easy maintenance. Powder just slides right off the surface of my work table...I’d like the same experience with my new work bench.
Mark, there is an old woodworker's trick for finishing/assembly tables that you might want to consider. First, you buy a sheet of the thick masonite hardboard cut to the exact dimensions as your bench top (needs to be the thick stuff - not the thin version). Next, you cut and tack nail a thin hardwood border around the perimeter of your bench. It needs to stand proud of the bench surface by the exact same thickness as the masonite.
You then just drop the masonite piece onto the top and that border keeps it securely in place. When it gets banged up or stained, you flip it over and use the other side until it gets too bad then you start over with a new piece.
You then just drop the masonite piece onto the top and that border keeps it securely in place. When it gets banged up or stained, you flip it over and use the other side until it gets too bad then you start over with a new piece.
Doyle, that sounds like an interesting approach for a work surface, but I can’t visualize how you would mount presses and other gear. Do you drill through both the Masonite surface and the work bench? Then when you flip it over you need to drill perfectly aligned holes to remount your equipment.
Sounds like it could work in some applications, but I know your talking above my skill level. I can assemble things fairly easily. Building things...now that’s skill and equipment I don’t have. Interesting, and food for thought though. Appreciate the input.
Sounds like it could work in some applications, but I know your talking above my skill level. I can assemble things fairly easily. Building things...now that’s skill and equipment I don’t have. Interesting, and food for thought though. Appreciate the input.
My reloading setup is a work in progress
I quit work and brought my Knack box home (rolling work bench model). I had a solid wooden top bench I bough years back.
Then there is my old klunker Sears bench.
They are now a sort of U in the space I can fit it in the shop, unfortunately I had a lean to to build for my Ural so I got fare enough to reload and then that took over.
It will get finished this winter. Two need better surfaces.
The original shop bench will as well.
I might use some of our spare cam lock flooring!
I quit work and brought my Knack box home (rolling work bench model). I had a solid wooden top bench I bough years back.
Then there is my old klunker Sears bench.
They are now a sort of U in the space I can fit it in the shop, unfortunately I had a lean to to build for my Ural so I got fare enough to reload and then that took over.
It will get finished this winter. Two need better surfaces.
The original shop bench will as well.
I might use some of our spare cam lock flooring!
Mark, I see the problem you brought up about the mounting holes. Getting them perfectly aligned so that they were in the same spot when you flipped would be tough. With a bench that nice, I'm not sure I'd want to permanently screw a press into it in the first place. I would get a piece of 1x6 hardwood and bolt the press to it using recessed holes on the bottom so that it sits flat on the bench surface. Mount that to the bench using woodworker's clamps. The advantage of doing that is in seconds you can convert it from a reloading bench to a gunsmithing/whatever bench.
Doyle, your response gave me a brain fart. It’s an idea percolating in my head. Take a piece of 1” plywood, line it up on the bench top and trace the peg holes already on the table. Drill out those holes in the plywood. Next, countersink press mounting holes in the plywood to mount the press. Then, bolt the “press table” to the bench using the pre-existing peg holes.
I like it.
A recommendation.
I countersunk a few Rockler T-rails into my bench. I mount my presses on a piece of wood that then I dog down to the bench on the rails. When I want to relocate or temporarily move a press, it takes minutes instead of requiring a major disassembly.
Only down side is that occasionally some spilled powder gets down in the rails and needs to be cleaned out.
Something to consider as finances allow.
I countersunk a few Rockler T-rails into my bench. I mount my presses on a piece of wood that then I dog down to the bench on the rails. When I want to relocate or temporarily move a press, it takes minutes instead of requiring a major disassembly.
Only down side is that occasionally some spilled powder gets down in the rails and needs to be cleaned out.
Something to consider as finances allow.
Marco Califo
New member
I have that HFT bench waiting to be assembled. To protect the top I like the idea of spar varnish or polyurethane. PU comes in satin, semi-gloss, etc. Which finish would be better?
I also have an Inline Fabrication mount base and tops for my Lyman turret, Redding O frame, and Lee Auto Breech Lock Pro Progressive Press (still in box). I will drill through the benchtop to mount that per IF instructions.
All other bench top items I plan to bolt to plywood cut to size, with carriage bolts threaded end up. That way I can move them without drilling into the desktop. Powder measure stands, Wilson Trimmer, etc.
I also have an Inline Fabrication mount base and tops for my Lyman turret, Redding O frame, and Lee Auto Breech Lock Pro Progressive Press (still in box). I will drill through the benchtop to mount that per IF instructions.
All other bench top items I plan to bolt to plywood cut to size, with carriage bolts threaded end up. That way I can move them without drilling into the desktop. Powder measure stands, Wilson Trimmer, etc.
Marco Califo
New member
Looks like Man o' War spar varnish "as no mas"
At Lowes and HD, anyway.
At Lowes and HD, anyway.
Last edited: