How many of you have experience with the Speedfeed shotgun stocks? I just ordered the Tac-IV-S model. It's a full stock with pistol grip but without the extra shell carriers in the stock. It's supposed to be a bit shorter model that is supposed to be more geared to use for smaller persons or persons wearing body armor. Anyone got any experience, feedback, etc???
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Feedback on speedfeed stocks
- Thread starter jadams951
- Start date
LeadPumper
New member
SpeedFeed
I have the SF III, (with extra capacity), pistol grip stock set on an older Mossberg 500. Well, had actually. After I installed it, I found the length of pull, (from trigger to rear of stock) was longer than the stock stock. It looked cool, but the pistol grip didn't fit directly behind the trigger guard. There was almost an inch of space between the two, hence the longer pull.
I checked to see if I had installed it correctly, I had. The older design of my Mossberg (20 years old or so) didn't work so well with the SF stock, so off it came and the origional went back on. I'm still looking for a Mossberg 500/590 to use it with...
The adventure continues.
-LeadPumper
I have the SF III, (with extra capacity), pistol grip stock set on an older Mossberg 500. Well, had actually. After I installed it, I found the length of pull, (from trigger to rear of stock) was longer than the stock stock. It looked cool, but the pistol grip didn't fit directly behind the trigger guard. There was almost an inch of space between the two, hence the longer pull.
I checked to see if I had installed it correctly, I had. The older design of my Mossberg (20 years old or so) didn't work so well with the SF stock, so off it came and the origional went back on. I'm still looking for a Mossberg 500/590 to use it with...
The adventure continues.
-LeadPumper
I have the same style as you on a moss 500. I am very pleased. There is one concern, if you take the trigger mechanism off to clean the gun regularly you will want to file down how the trigger mechanism fits into the stock. You will see what I mean when you get it and put it on. All it took me was a few swipes with a file and it was fine.
Curious
Curious
curious is right
If you have the SFIII it will need just a little extra finishing to get the trigger group to slide in and out easily. I've also got a standard SF stock on my 590 and love it, another benefit of the SF stocks is the excellent recoil pads, they make buckshot or magnum rounds much easier on the shoulder.
If you have the SFIII it will need just a little extra finishing to get the trigger group to slide in and out easily. I've also got a standard SF stock on my 590 and love it, another benefit of the SF stocks is the excellent recoil pads, they make buckshot or magnum rounds much easier on the shoulder.
I use the SF TACIV S on all my 870s and 1100s, they are one of the finest stocks available. They are short enough to use with webbing or armour, very strong, and the pistol grip/stock shape is the nicest one to use. Everyone I know with their 14" 870s use them. If you want to see some pics go to http://www.smokinggunfx.com and look under the movie guns gallery.