Duplication of serial numbers on firearms.

N

Noddy

Inactive
Please share your view. What is the possibility that one manufacturer would manufacture two firearms of different calibres, but with the exact same serial number. Say for instance a .38 special calibre revolver and a .22lr calibre revolver, but both firearms have the same serial number.
Did any one find something like that in the past?
If you did, would you mind sharing the information?
Recently a question in this regard was put to me regarding Iver & Johnson revolvers.
Looking forward to any replies.
 
I can't speak from experience, but I believe manufacturers may only assign a serial number to a single firearm within a model classificiation.
 
Duplicating serial numbers defeats the purpose of going to the trouble and expense of applying serial numbers.

That said, before there were laws mandating and controlling serial numbers, it's certainly possible that manufacturers made errors that resulted in duplicated serial numbers. I can't ever recall seeing/hearing conclusive proof that it ever happened, but it seems reasonable that it could have.
 
The 1968 GCA specified that manufacturers cannot use the same serial number more than once:

§ 479.102 How must firearms be identified?

(a) You, as a manufacturer, importer, or maker of a firearm, must legibly identify the firearm as follows:

(1) By engraving, casting, stamping (impressing), or otherwise conspicuously placing or causing to be engraved, cast, stamped (impressed) or placed on the frame or receiver thereof an individual serial number. The serial number must be placed in a manner not susceptible of being readily obliterated, altered, or removed, and must not duplicate any serial number placed by you on any other firearm.
Click to expand...
 
Thank you Tom !!!

So when you see a listing on a match set of firearms and it reads; Matching Serial numbers, what they really mean, is Consecutive serial numbers. From time to time, I have run into this question and finally glad to see a definitive answer. .... ;)


Thank you Tom !!!
Be Safe !!!
 
Noddy said:
Please share your view. What is the possibility that one manufacturer would manufacture two firearms of different calibres, but with the exact same serial number.
Click to expand...
Possibility = zero (or as close to zero as you can get while still allowing for an exceedingly unlikely mistake).
 
Pahoo said:
So when you see a listing on a match set of firearms and it reads; Matching Serial numbers, what they really mean, is Consecutive serial numbers. From time to time, I have run into this question and finally glad to see a definitive answer. ....
Click to expand...

Except ...

When Colt brought out the first M1911 reproductions, the model O1911, it was to be a "limited production" run of 4,000 pistols. Based on their experience with the less-authentic M1911A1 reproduction, they didn't expect to sell all 4,000 ... but they did. They first proposed to just keep going, but the people who had bought theirs howled(rightly) that Colt should not unilaterally raise the limit of a 4,000 piece run. So they changed the finish and called it a model O1918 -- and started the serial numbers over. The difference was that the serial number included the initials "WMK," for William M. Keyes, the then-president of Colt. On one of the models, the "WMK" came ahead of the numerals, on the other model the "WMK" followed the numerals.

Same numbers, different serial numbers.

Ruger did the same thing with their Blackhaw anniversary models. It was possible to buy a .357 and a .44 anniversary Blackhawk with matching serial numerals, but there was a letter or two involved that made each one unique. At one time I had a pair of 50th anniversary Blackhawks, and they were bought as "matching serial numbers."
 
My friend is a forensic examiner. He had a case where a man was arrested for possession of a stolen revolver. A detailed search listed showed the stolen revolver to be Chrome with 2" barrel. The revolver taken as evidence was a 4" blue steel. Prior to 1968 records showed different models sometimes were issued numbers that had already been assigned to other models. As already posted prefix letters are now used to individualize firearms.
 
I think that when S & W was using "S" serial numbers there was a chance you could get a "K" frame and a "N" frame with the same number. I think this would have been before 1968
 
In the past, cheap (and not so cheap) firearm manufacturers would number guns any way they felt like it. If a major chain wanted 5,000 numbered from serial 1 they would do it. A glance at Flayderman shows many models from the same maker starting at #1.
FN would do a run of Hi-Powers like that if the buyer wanted it (not now though).
Of course many firearms registration systems did not record the suffix letter on Lugers (hard to read anyway, in many cases) so there was the possibility of repeats every 9999 units
 
Pahoo said:
Same numbers, different serial numbers.
Click to expand...
I think that is what I said but not sure anymore .....
Click to expand...
No, you said matching means consecutive.

What I'm talking about is where one pistol's SN would be "3025 WMK," and another pistol's SN would be "WMK 3025." The "WMK" is part of the serial number, so even though the actual numbers are the same, the serial numbers are unique because of the placement of the letter characters.

In the case of the Ruger 50th Anniversary Blackhawks, the three numbers before the dash made the difference. As in

.357 Mag == SN 520-13895
.44 Mag === SN 870-13895
 
Last edited:
In older guns, a possibility from the same manufacturer, on different models.

Between makers, quite possible a gun made by A would have a duplicated serial on a gun made by B.
Denis
 
Ruger did it with Single-Action revolvers and the Mini-14 in the '60s.

It involved a block of serial numbers accidentally being reused, after they had previously been applied to a different model.
Those that they caught before they shipped were stamped with a "D" before the serial number.

...But somewhere between 600 and 800 Single Sixes are out there with serial numbers previously used on centerfire revolvers (Blackhawks, I believe). There are said to be about 300 Bearcats with uncorrected duplicate serial numbers (the number varies greatly, depending upon your source).
And, there are some Mini-14s with duplicate serial numbers.

I have seen claims that there are 10-22s with duplicate serial numbers, but I have never seen any numbers or photos to back it up. (There are collectors that spend a great deal of time tracking down Ruger duplicates, so they have the matched pairs.)


I do not, however, know of any of these duplicates being shipped after the 1968 GCA, except for the Mini-14.


Edit: The Mini-14s with duplicate serial numbers were even more limited than I thought. Although they did ship well after the 1968 GCA (between 1997 and 2000, actually), there are/were, apparently, only six rifles with duplicate numbers. They are not marked with a D, and are true duplicates.
The duplicates are in the serial number range of 195-31768 to 196-09535.
The duplication occurred when the each serial number was used for standard Mini-14 rifles and then again for Mini-14 "Ranch" rifles.

When Ruger realized their mistake, they notified the ATF that they would attempt to recall the duplicates and re-stamp them with the 'D' if those Minis ever made it back into Ruger's possession.
 
Last edited:
Prior to 1968 records showed different models sometimes were issued numbers that had already been assigned to other models.
Click to expand...
That was common practice for S&W. When they came out with a new model the serial number would usually start at 1. This practice had ended by 1968.

Jim
 
Had that precise issue occur with a Ruger. Years back, while a LEO I, out of idle curiosity, ran the # on a revolver I acquired new (brand new and from a reputable dealer) years prior to that data base's existence. The # kicked back a .22 auto made by Ruger bearing that precise SN.....listed as stolen in the NCIC data base.

Poses the interesting question of what sort of hassle I'd have had if another LEO ran that # on a stop or out of state.

Tell, you another. Had occasion to utilize a data bank that listed SSN's...........not a Gov't site, rather one utilized by PI's..........had my personal # show up credited to another person in my state of SSN origin .


Dupes, DO happen. The consequences are kinda murky tho. On the latter I personally contacted the SSN head in my jurisdiction and was told to just 'not worry about it'!!!!
 
Been There (can't recall where), Done That (can't remember what), Got The T-Shirt (dunno where I left it). :)
Denis
 
Years ago a Glock enthusiast once told me that his return on a defective G19 received a new part that had the same serial number. As I understand it now, Glock will use the same serial number on such concurrence, but they will also add a "suffix" to the new part's serial number.

So instead of receiving say a new barrel with the number 123456, you'd get one with 123456-X.
 
You must log in or register to reply here.
Back
Top