(Dis)assembly guide for hi standard double nine?

R

Ryu825

New member
I cannot find an assembly guide for this gun anywhere on the internet.. I took it apart to clean up the inside and give it a trigger job. I did find the schematics for it so I know I didn't lose anything but I messed up somewhere while putting it back together and now the trigger won't reset all the way. I either have to click the trigger in place by pushing it forward about 1/8 inch or slightly pull the hammer back, let it go then pull again to work the action. It was a pain putting this gun back together so I don't want to take it down again till I know exactly what to fix. I'm hoping maybe someone here knows what I did wrong based on my explanation or can provide an assembly guide written or video for a hi standard double nine 22lr western style w104? :confused:
 
That gun is basically a High Standard Sentinel, and I think there are some videos on that gun. Is it possible that you got the heavy trigger return spring in place of the much lighter hand spring? They are similar, though not identical.

Jim
 
Get a copy of the NRA's Firearms Assembly handbook. You will need the Pistols and Revolvers volume. Complete disassembly and reassembly instructions for the High Standard Sentinel which is mechanically very similar to your gun.

Your local library may have a copy or possibly one of the better gun shops in your area.
 
Thanks for replying guys. After much searching I still cannot find an assembly guide :(. The best I could get was the schematics.. The only thing I haven't looked at yet is the NRA book. Looks like I'll have to grab one of those and see.
 
You must log in or register to reply here.
Back
Top