You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Daewoo parts?
- Thread starter pawz68
- Start date
Chad Young
New member
Scope mounts:
American Spirit Arms
B-Square, http://www.b-square.com
Post-Ban replacement stocks and parts kits to convert to non-thumbhole stocks:
Ace Manufacturing Ltd., Inc.
I have found no other sources of parts. Somewhere, I have a list of what DR-200/300 parts are interchangeable with AR-15 parts and will post if I find it.
American Spirit Arms
B-Square, http://www.b-square.com
Post-Ban replacement stocks and parts kits to convert to non-thumbhole stocks:
Ace Manufacturing Ltd., Inc.
I have found no other sources of parts. Somewhere, I have a list of what DR-200/300 parts are interchangeable with AR-15 parts and will post if I find it.
Try this link for lots of good information on the
Daewoo DR200.
http://gunsworld.com/world/dr200/dr200_us.html
Daewoo DR200.
http://gunsworld.com/world/dr200/dr200_us.html
Hmmmmm... I'd previously either seen or heard of most of those sites / places. But... I haven't run across an `interchange list' and would be *very* interested in getting myself a copy.
BTW, I've put over 1K rnds through mine and have been generally satisfied with it's performance. About the only `problem?' I've had with mine is that it `tosses' the brass almost to "EBF Egypt" and makes `policing' one's brass quite difficult. {WAN GRIN!} For the time being I've been using sort of a `backstop' to catch the brass and drop it next to me whenever I'm shooting on my home range. I'd like to find a `brass catcher' that wasn't a `kludge' that I could use at `public?' ranges and not get incredulous stares doing it. Oh, I've found that the Burris Red Dot sight is a *great* accessory. (I'd *love* to have an ACOG or similar sight. But... *Ouch*! The buck$! {GRIN!} The Burris, at 35mm in dia., is an acceptable substitute.)
BTW, I've put over 1K rnds through mine and have been generally satisfied with it's performance. About the only `problem?' I've had with mine is that it `tosses' the brass almost to "EBF Egypt" and makes `policing' one's brass quite difficult. {WAN GRIN!} For the time being I've been using sort of a `backstop' to catch the brass and drop it next to me whenever I'm shooting on my home range. I'd like to find a `brass catcher' that wasn't a `kludge' that I could use at `public?' ranges and not get incredulous stares doing it. Oh, I've found that the Burris Red Dot sight is a *great* accessory. (I'd *love* to have an ACOG or similar sight. But... *Ouch*! The buck$! {GRIN!} The Burris, at 35mm in dia., is an acceptable substitute.)
My brass catcher is a Kludge but it works and the price is right. I use a cardboard box approx 2' square. The box is laying with its open top facing me (shooting from a bench)and a handtowel stapled to the side of the box so it hangs down over the open top. The warp 1 brass hits the towel, gets slowed down, bounces off the back of the box but drops down when it hits the back of the towel on the rebound.
Just watch for the hot brass to roll out and autograph your right arm just as your squeezing off the next shot.
Just watch for the hot brass to roll out and autograph your right arm just as your squeezing off the next shot.
Chad Young
New member
Ok, a link to Ace Limited is available at http://www.riflestocks.com
Apparently, you can replace the trigger set with that of an AR15 if you replace all three major trigger group parts.
When I get the whole list of swappable parts, I will post it.
Apparently, you can replace the trigger set with that of an AR15 if you replace all three major trigger group parts.
When I get the whole list of swappable parts, I will post it.
Dundee,
That sounds a lot like what I am already using. {GRIN!} In my case it's actually a framework made out of old tent posts and a cheap tarp. It's big enough that I can shoot off of a bench or `offhanded' and pretty much catch most of my brass. (I had a friend who also ran a range comment to me that while he thought it was a pretty `neat?' idea it wouldn't go over too well at a `public?' range and that was why I was looking for something a tad bit more `elegant?' {WAN GRIN!}) As for those `autographs?'...!!! Been there, done that. {YIKES!}
That sounds a lot like what I am already using. {GRIN!} In my case it's actually a framework made out of old tent posts and a cheap tarp. It's big enough that I can shoot off of a bench or `offhanded' and pretty much catch most of my brass. (I had a friend who also ran a range comment to me that while he thought it was a pretty `neat?' idea it wouldn't go over too well at a `public?' range and that was why I was looking for something a tad bit more `elegant?' {WAN GRIN!}) As for those `autographs?'...!!! Been there, done that. {YIKES!}
Chad,
Those ACE stocks are kinda neat but *if* I were going to change the `furniture' on mine I'd kinda like to go with something more along the lines of what the K2 has. {WRY GRIN!} Though... That still doesn't rule out my possibly getting one of those ACE setups just to have around. Amazingly enough I actually find the `thumbhole' stock that's on mine to be very comfortable and so do the majority of those I've let try it out, too. Still... *If* I could get K2 styled `furniture' in *real* wood.... {BSE GRIN!}
Those ACE stocks are kinda neat but *if* I were going to change the `furniture' on mine I'd kinda like to go with something more along the lines of what the K2 has. {WRY GRIN!} Though... That still doesn't rule out my possibly getting one of those ACE setups just to have around. Amazingly enough I actually find the `thumbhole' stock that's on mine to be very comfortable and so do the majority of those I've let try it out, too. Still... *If* I could get K2 styled `furniture' in *real* wood.... {BSE GRIN!}