CZ-52 problems

E

eeshooter

Inactive
After firing about 5 rounds through my newly aquired CZ 52, the trigger won't return to the forward position unless I manually move it. What's the problem? Is there something like a trigger return spring that needs to be replaced or something?
I've cleaned it again but it still won't return forward.

HELP!
The pin abouve the trigger keeps trying to come out as well.
 
i would say its gunked up or the trigger return spring needs to be set back in its hole on the disconnect bar off the trigger.your going to have to take the grip panel off the right side and commit to lifting the plate after removing the nut youll see.ps dont overtighten that nut as well.
please see my page for info on performing this.itsnot at all hard to do but does take some patience.remember to lift the plate up at the rear by the hammer,use a small screw driver to lift it up as its notched in the front towards the muzzle with a small lip.youll see the spring and make sure its in its hole.add some tension to it by lightl;y bending the spring.

http://members.fortunecity.com/oldvalkyry/cz52page.html
 
You must log in or register to reply here.
Back
Top