Changing Sights on a Springer 1911 loaded?

P

Phantom8

New member
.... i want to know if you can change out the front and rear "fixed" 3-dot sights on a Springfield 1911 loaded??? They look like they are dove-tailed into the slide.... how difficult is this process? Can they be changed out for a XS sight system? ( of course, if they have such) ...Any information would be great! Thanks!!
 
sights

Sir;
If dovetailed use an aluminum or brass punch - put a matchbox between it and the sight and drive them out from left to right with the slide firmly mounted in padded vise jaws. (looking at the slide as you would shoot)
Harry B.
 
... Harry, when you say "matchbox"... do u literally mean, take a cardboard matchbox, empty out the matches and use the material?... or is that another term for some kind of padding. Sorry if this is a stupid question...i have never changed sights before... thanks for your help in advance!
 
sights

Sir;
Just use some cardboard about the thickness of a common match cover from Bob Evans - a folding set of matches. Some sights are really in there - secure the slide in a good vise with cardboard to protect the sides and have at it. Be sure to drive out the pin in the front sight if there is one.
Now, if your new sights are too tight always file the SIGHT DOVETAIL - not the slot!
Harry B.
 
Many manufacturers have different style cuts in the slide. You will need to buy sights that fit an SA.

Also, that front sight is pinned. You need to take out the pin before you try to remove the sight.


Dave
 
You must log in or register to reply here.
Back
Top