Chambering Reamers for sale (USED)

[LongRifles Inc.]

Ok gents, I have a slew of chambering reamers that I don't use anymore. (All my stuff now is made exclusively by PTG)

Here's the list and a photo showing all of them lumped together. All reamers are sold "AS IS" and I make no claims as to servicability or sharpness. My advice would be to send it in and have it tuned up by David Kiff, owner of PTG.

Chambering Reamers:

SOLID PILOT, HSS Chamber Reamers

1. 6mm Remington ROUGHER, Clymer
2. 270 Winchester FINISH
3. 7mmX64 FINISH, Clymer
4. 300 Winchester Magnum FINISH, Clymer
5. 300 Weatherby FINISH, Clymer
6. 270 Winchester ROUGHER, Clymer
7. 270 Winchester FINISH, Clymer
8. 338 Winchester Magnum ROUGHER, M/H Tool
9. 375 H/H Magnum ROUGHER, Clymer
10. 7mm Mauser FINISH, Clymer
11. 375 H/H Magnum FINISH, (no name)
12. 7X57 Mauser FINISH, (no name)
13. 7mm Mauser FINISH, Clymer
14. 7mm Remington Magnum ROUGHER, Clymer
15. 270 Weatherby Magnum FINISH, M/H Tool
16. 17 Mach IV FINISH, PPG
17. 257 Roberts ROUGHER, M/H Tool
18. 7X57 FINISH, Clymer
19. 22 Winchester Rimfire Magnum FINISH, ClymFer
20. 22-250 Remington ROUGHER, Clymer
21. 375 H/H Magnum FINISH, Clymer
22. 257 Roberts FINISH, M/H Tool
23. 30-06 FINISH, Clymer
24. 7mm Mauser ROUGHER, Clymer
25. 6mm Remington FINISH, Clymer


FLOATING PILOT, HSS Chamber Reamers

1. 284 Winchester FINISH, Clymer (Pilot/screw missing)
2. 280 Remington FINISH, Clymer
3. 257 Belt NE FINISH, JGS (pilot/screw missing)
4. 300 Winchseter Magnum FINISH, JGS
5. 22PPC FINISH, Clymer (pilot/screw missing)
6. 257 Roberts FINISH, Clymer
7. 22 Remington BR FINISH, Clymer (pilot looks stuck but nothing is broke)


Prices:

Solid Pilot tools are $25.00 each. FIRM
Floating Pilot tools are $30.00 each. FIRM

BUY THEM ALL FOR $700.00 AND I'LL PAY GROUND FREIGHT TO ANYWHERE CONUS. (INDIVIDUAL TOTAL OF $835.00)

Payment:

Personal Check, Money Order, credit card is fine. NO PAY PAL

I MAKE NO CLAIMS REGARDING THESE TOOLS. ITS ALL OLD STUFF THAT I'VE EITHER BOUGHT OR SCROUNGED OVER THE YEARS AND I NOW HAVE NO USE FOR. TUNE THEM UP AND THEY'LL PROBABLY WORK JUST FINE.


Contact info:

Chad Dixon
605.490.2561
contact@longriflesinc.com

 

[hickstick_10]

Were the reamers stored like there displayed in the picture?

 

[LongRifles Inc.]

Short answer, yes.

Long answer, yes and no. These have been rotting in the bottom of a tool box for as long as I've been in this trade. I never threw them or banged them around, BUT they were put away in bulk with no protective covering.

That'd by why they are priced very, very reasonable and why I recommend that they be sent out for a resharp.

Chad

 

[Bud Helms]

Not a For Sale forum.

Closed.

LongRifles, Inc. you have a PM.