Roadrunner
New member
Can anyone recommend a gunsmith with experience working on Cetme rifles? Thanks.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Cetme Gunsmith??
- Thread starter Roadrunner
- Start date
Destructo6
New member
Is this a real, made in Spain, CETME or one of the newer parts kit guns?
You might try asking over at www.hkweaponsystems.com .
J.Cotter, of IGF, does good work on HK kit guns, so he may be able to work out bugs on a CETME, too.
You might try asking over at www.hkweaponsystems.com .
J.Cotter, of IGF, does good work on HK kit guns, so he may be able to work out bugs on a CETME, too.
Roadrunner
New member
Destructo66, I'm not sure if these are real Spanish Cetme. I've gotten some of my info from The Cetme Page.
I was thinking of purchasing one from one of a number of vendors, J&G Sales, Century, or AIM. I have read a number of reviews of the rifle, seems like there have been some feeding problems and other issues.
I'm not a gunsmith, nor do I have any tools necessary to do any work myself. Besides, at the moment, I'm not confortable stripping down a rifle to work on it. I always seem to have an extra part or spring left over.
I'm looking for someone who works on Cetme rifles that can strip down the rifle for inspection, check headspace, maybe work on/polish the trigger for a smooth pull, correct any feeding problems, if any, and maybe even re-park the rifle. All of these I have no experience doing.
I'm still searching the Internet but thought I would ask here. Thanks.
I was thinking of purchasing one from one of a number of vendors, J&G Sales, Century, or AIM. I have read a number of reviews of the rifle, seems like there have been some feeding problems and other issues.
I'm not a gunsmith, nor do I have any tools necessary to do any work myself. Besides, at the moment, I'm not confortable stripping down a rifle to work on it. I always seem to have an extra part or spring left over.
I'm looking for someone who works on Cetme rifles that can strip down the rifle for inspection, check headspace, maybe work on/polish the trigger for a smooth pull, correct any feeding problems, if any, and maybe even re-park the rifle. All of these I have no experience doing.
I'm still searching the Internet but thought I would ask here. Thanks.
Save for pressing in the barrel,
since I've been trained as a HK armorer, I can walk you through assembling it. After Dec. 31, I'll be at Oleg's place: http://www.TheHighRoad.org
since I've been trained as a HK armorer, I can walk you through assembling it. After Dec. 31, I'll be at Oleg's place: http://www.TheHighRoad.org