Can I get H&R recoil pads?

B

Big Tom

New member
Okay, sorry if this seems like a really noob quetion but, I am buying two H&R regualr toppers in 20 gauge. I have never used a shotgun before bu weather its needed or not I want the ribbed H&R recoil pads the Topper Deluxe/Deluxe classic come with...can I buy them nd put them on the gun and if so how much would one cost? Cuz I cant find one anywhere. If you need to know what I am talking about go here:
http://www.hr1871.com/Firearms/Shotguns/topper.asp

Thanks!
 
For one thing, it would change the length of pull of the gun, making it longer. The guns that come with pads are built to take that into account. You might find you need to shorten the stock a bit to make the LOP feel right.
They don't show them on their website that I can find but you might contact them and ask.
 
Thank Laz, I guess I will have to look for the number. But a longer stock shouldnt matter cuz I am pretty big. Do you think I would need a pad for it in 20? I was reading an article and it said a 12 gauge shuld be atleast 7.5lbs and 20 about a pound less...any truth to that? I really dont want to be shooting my first shotgun and having pain in my shulder after for having the recoil kick te crap out of me...
 
. But a longer stock shouldnt matter cuz I am pretty big. Do you think I would need a pad for it in 20? I was reading an article and it said a 12 gauge shuld be atleast 7.5lbs and 20 about a pound less...any truth to that? I really dont want to be shooting my first shotgun and having pain in my shulder after for having the recoil kick te crap out of me...
Click to expand...

Being "big" does not necessarily mean you need a long LOP.

As to recoil pads, a pad will help reduce the felt recoil. Coupled with a proper fit, your shoulder will thank you, especially down the road a few years - (I know this from personal experience). I shoot as heavy a gun as I can coupled with the lightest loads for the least recoil. When we shoot sporting clays, it is not unusual for our group to shoot 200-300 during the day. By the end of the day, many are getting tired and fatigued and their scores show it. Mine do not suffer nearly as bad.
 
Proper fit also includes drop at the heel, drop at the comb, pitch, cast toe etc.....

While getting it perfect on a H&R would seem ridiculous as the gun isn't that expensive, it IS something to consider down the road as you upgrade to other guns. Guns that are poorly fit and smack you hard on the cheek or shoulder are no fun to shoot.
 
Big Tom - I am no shotgun expert by any means but I would offer these thoughts: In terms of weight to load, many people refer to the "rule of 96" which says a shotgun should weigh 96 times the shotload. So, if you are shooting a 1 ounce load, the shotgun should weigh at least 96 ounces or six pounds. If you are shooting a 1 1/4 ounce load, the shotgun should weigh at least 120 ounces or seven and one-half pounds. The H&Rs tend to run pretty light, like 5 1/2 to 6 pounds for a typical Pardner. (at least in 12 gauge) which means that shooting any load over 1 ounce kicks pretty good. It depends on your use. I don't mind them for a reasonable number of shots. I often hunt with a Pardner. Note, I seldom fire many shots and usually have a fairly heavy coat on. You might want to try the guns without a recoil pad to at least see how they feel to you.
 
If you are interested in an H&R factory pad, call them at (866)776-9292 (toll free). Tell them what you need and they may be able to help you out. Nice folks.
 
You must log in or register to reply here.
Back
Top