Bullet feeding die

[WCWV]

Good morning folks, can anyone tell me if there's a bullet feeding die out there that'll feed cast lead?
I've tried RCBS and Hornandy, both will feed jacketed factory great.
I went through the polishing process on the Hornady and the 45 cal dose pretty good, but the 380 / 9mm doesn't do very good at all and I'm tired of fooling with it, I would suspect the weight of the bullet itself between the two calibers makes the difference.
Thanks for any input

 

[T. O'Heir]

You mean the bullet tube on a progressive press?
There's a relatively huge difference between .380 and 9mm bullets. .380's tend to be 100 grains or less. Vs the 115 plus for a 9mm.
"...the polishing process..." What polishing process?

 

[Unclenick]

He's talking about the die that interfaces between a motorized bullet aligner/feeder's drop tube and the case, like this one.

 

[WCWV]

Exactly Unclenick, feeder tubes are hardly nothing.

 

[jmorris]

I use GSI bullet feeders with my cast bullets but they only made them for Dillon presses and quit at the end of last year, so you would have to find a used one or new old stock somewhere.

 

[WCWV]

Thanks