building a pistol cal ar
- Thread starter reaper715
- Start date
You will need:
9mm hammer-
9mm buffer-
And you could go the complete upper route, or if you build on a stripped upper, you would also then need a 9mm bolt and carrier, ejection port cover and barrel.
You can get these parts locally most of the time. I got them from Ranier Arms.
BTW, this needs to be in The Art Of The Rifle, not NFA section.
9mm hammer-
9mm buffer-
And you could go the complete upper route, or if you build on a stripped upper, you would also then need a 9mm bolt and carrier, ejection port cover and barrel.
You can get these parts locally most of the time. I got them from Ranier Arms.
BTW, this needs to be in The Art Of The Rifle, not NFA section.
Reaper,
If you haven't been there yet, go check out www.ar15.com. They have a section dedicated to pistol caliber ARs. Everything you need to know.
I have a 9mm Rock River Arms complete upper on my DPMS lower. It uses modified Uzi mags and runs pretty good. I bought the complete upper directly from RRA, but you could assemble your own if you have basic skills and tools.
If you haven't been there yet, go check out www.ar15.com. They have a section dedicated to pistol caliber ARs. Everything you need to know.
I have a 9mm Rock River Arms complete upper on my DPMS lower. It uses modified Uzi mags and runs pretty good. I bought the complete upper directly from RRA, but you could assemble your own if you have basic skills and tools.
Unless you plan to go SBR with your rifle, attach a supressor to it, or if you are lucky enough to own a registered DIAS (or rich enough to buy one), you are not building an NFA gun. However, 9mm ARs are probably the best guns for shoulder bumpfiring (faux-auto, as I like to call it), if you're into that sort of thing.