gearchecker
New member
I have an early Buck Mark with the old style firing pin. Lately I've been getting light primer strikes and a great deal of mis-fires. I've looked just about everywhere and can't find a replacement firing pin.
So here's my question. . .
The firing pin has a slotted hole allowing the forward movement of the firing pin into the primer. Could I possibly lengthen the slot by a 1/2 milimeter or so, to give it more room to move forward into the primer?
So here's my question. . .
The firing pin has a slotted hole allowing the forward movement of the firing pin into the primer. Could I possibly lengthen the slot by a 1/2 milimeter or so, to give it more room to move forward into the primer?