You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Brass catcher for 308 AR?
- Thread starter deepcore
- Start date
Not sure I would recommend them, I have one for my ARs and it works, kind of. It is just easier to use a backstop and pick up the brass than using it.
Some use a army blanket in the area that the cases will end up and just scope them up afterwords. Much like shooting dice on a army blanket they do not bounce.
They also have the mesh nets that sit next to you, but have never tried one.
Good luck and if you find something better let us know.
Jim
Some use a army blanket in the area that the cases will end up and just scope them up afterwords. Much like shooting dice on a army blanket they do not bounce.
They also have the mesh nets that sit next to you, but have never tried one.
Good luck and if you find something better let us know.
Jim
madcratebuilder
New member
I've seen them, google well find them.
TargetTerror
New member
You want one of these:
http://www.elmfg.com/store/univbc.html
I have the .223 version and it works great. I have also used one of the mesh bags, though the rounds never actually managed to make it into the bag itself. Still, for prone or bench slow fire, the mesh bag works fine. The plastic box from E&L works great in any position, and the brass all gets inside.
http://www.elmfg.com/store/univbc.html
I have the .223 version and it works great. I have also used one of the mesh bags, though the rounds never actually managed to make it into the bag itself. Still, for prone or bench slow fire, the mesh bag works fine. The plastic box from E&L works great in any position, and the brass all gets inside.