Bench Top Brass Catcher - where to buy?

M

mjrodney

New member
At the range today, I saw two shooters using a Bench Top mounted brass catcher. It was not attached to the pistol, but rather was free standing near the side of the gun. It used a telescoping vertical pole and used a mesh net to catch the brass.

Can anyone direct me to a supplier of this handy little device?
 
brass catcher

MJ - I made my own for less than $5. Cut the top "ridged" section off a 5 gallon pail for the frame. At WalMart I bought one of those zippered bags women wash their delicates in in the washing machine. It fit around the hoop from the 5 gal pail and I secured it with ty wrap straps. I then made a small wood block which I attached to the top of the pail and drilled a hole so a dowel could be inserted and extend into the net to hold it up and open. On the bottom I fashioned another block which I screwed to the pail hoop. This block has a small steel plate (2x2x 3/16) which is drilled and tapped for the mount on my camera tripod. Can be set at any height you like and works great.
 
You must log in or register to reply here.
Back
Top