You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Bayonet on shorty?
- Thread starter gds
- Start date
Quakemaster
New member
Is that to go with one of those special forces 1911s with the stabbing gizmo on the butt of the gun? Talk about close quarters!
Bushmaster sells a little bolt-on bayo mount dohickey you could add on the gun 4" or so (I guess) behind the suppressor, forward of the front sight assembly. Can't find it on thier website, but I remember it from their catalog a couple years back.
This assumes you're pre-ban, of course, as otherwise you're over your evil features count.
If you care.
Oh.. also you'ld need a suppressor of some kind (or brake of equivalent diameter) to keep the bayo from sloshing around on the barrel.
-K
edited for a PS
Just occured to me... one of the extended fake-CAR15 suppressors that sleeves back over the barrel may give you enough diameter for the front bayo ring... might work, never tried it:
(second item down)CAR 15 suppressors
This assumes you're pre-ban, of course, as otherwise you're over your evil features count.
If you care.
Oh.. also you'ld need a suppressor of some kind (or brake of equivalent diameter) to keep the bayo from sloshing around on the barrel.
-K
edited for a PS
Just occured to me... one of the extended fake-CAR15 suppressors that sleeves back over the barrel may give you enough diameter for the front bayo ring... might work, never tried it:
(second item down)CAR 15 suppressors
chickrepelent
New member
DPMS makes them. They sell for $20-25 bucks. They have them for the .750 or the .560 barrel.
Art Eatman
Staff in Memoriam
Bayonets? Bayonets? On an AR? And on a Shorty? Am I missing something?
Could somebody please elucidate as to the purpose of such an expenditure?
As usual,
Art
"Of all the things I've lost, I miss my mind the most."
Could somebody please elucidate as to the purpose of such an expenditure?
As usual,
Art
"Of all the things I've lost, I miss my mind the most."
bayonets are great for slicing 2 inch celulose sheet insulation
i un-mount mine for this kind of work
they are designed to mount up properly on a military 14.5 inch barrel
they really do not mount on a 16 inch civilian AR
they do mount nicely on the 590 Mossberg 12 gauge or the 20 inch barreled AR
dZ
i un-mount mine for this kind of work
they are designed to mount up properly on a military 14.5 inch barrel
they really do not mount on a 16 inch civilian AR
they do mount nicely on the 590 Mossberg 12 gauge or the 20 inch barreled AR
dZ