Can any of you help me out with the installation of this? I'm use to dropping a dowel or stick in the end of the magazine of my Remington. I got my Dad's after he passed and wanted to take it dove hunting tomorrow. The manual looks like you've got to disassemble the entire shotgun to simply plug the magazine. Any help would be appreciated.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
B-2000 Magazine Plug
- Thread starter hodaka
- Start date
I don't have a B-2000 but this should answer your question....
http://www.midwestgunworks.com/field_service_manual/browning_b2000_field_service_manual.pdf
I thought you just had to unscrew the cap nut on the magazine ...to remove the barrel ...and the plug was accessible ...but maybe not...???
But you should disassemble the gun ...make sure its clean and properly lubed anyway before you go into the field...( in my opinion ).
http://www.midwestgunworks.com/field_service_manual/browning_b2000_field_service_manual.pdf
I thought you just had to unscrew the cap nut on the magazine ...to remove the barrel ...and the plug was accessible ...but maybe not...???
But you should disassemble the gun ...make sure its clean and properly lubed anyway before you go into the field...( in my opinion ).
Thanks Jim. This is much better than the manual that I had Googled up. I see how to insert a magazine plug now. Still it is a pain because of the design of the gas system on this thing. I had taken it apart and cleaned it but did not remove the magazine stop. That seems to be the place to insert the plug.
BTW - I learned that the barrel is improved modified so I think I'll take something else dove hunting.
BTW - I learned that the barrel is improved modified so I think I'll take something else dove hunting.