johnwilliamson062
Moderator
Are 9mm revolvers inherently more expensive, or could Armscor manufacture one without passing the $200 mark their revolvers normally stay under?
Would be a great gun IMO.
Would be a great gun IMO.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Armscor 9mm?
- Thread starter johnwilliamson062
- Start date
Aguila Blanca
Staff
9mm takes the same diameter bullet as .38 Special. Armscor could easily chamber their M200/M206 revolvers for 9mm just by how they ream the cylinders.
That's what moonclips are for.The extractor for rimless cartridges adds cost.
Operating pressure has to be taken into consideration, .38spl runs around 18000psi, 9mm about 35000. I'm not sure their revolvers could handle it.
johnwilliamson062
Moderator
I wouldn't mind moon clips. In their snub, I wouldn't mind 5 shots if it was under $200. I think they are larger than a J-frame or LCR, but still pretty petite revolvers. Would make a great nightstand gun.