Anyone have any suggestions for a Glock 19 drop in trigger?

B

bbousa

Inactive
I have a Glock 19 MOS gen4 with some slide cuts and milling done. I dropped in black Zev Tech match barrel as well. I was advised to put in a 15 LB recoil spring as well. I was looking at a few different triggers. Apex, Ghost, Agency Arms, etc... Anybody have any suggestions? I don't want to get any light primer strikes. I also would like an easy install, but if a little work has to be done, I don't really mind.

Thanks!
 
bbousa said:
I have a Glock 19 MOS gen4 with some slide cuts and milling done. I dropped in black Zev Tech match barrel as well. I was advised to put in a 15 LB recoil spring as well. I was looking at a few different triggers. Apex, Ghost, Agency Arms, etc... Anybody have any suggestions? I don't want to get any light primer strikes. I also would like an easy install, but if a little work has to be done, I don't really mind.



Thanks!
Click to expand...



I have changed the Trigger and trigger bar on my Glocks with a drop in kit from Overwatch Precision. I have also done the same kind of replacement with an Apex set.

I don't change any springs, but I did replace the Connector with a Ghost Triggers Ultimate. Trigger pull is exactly the same.

I prefer the flat faced triggers with a vertical configuration over a curved trigger.

Best of luck with your decision.


Sent from my iPad using Tapatalk Pro
 
I've used the Apex Action Enhancement Trigger w/factory Trigger Bar in a Glock 38, they have one a bit better for the Glock 19.. (I've used Ghost kits with various Glocks, too.) The Apex trigger, which is metal, is very nice -- and pricey. I like it a lot.
 
I have a Glock 19 MOS gen4 with some slide cuts and milling done. I dropped in black Zev Tech match barrel as well. I was advised to put in a 15 LB recoil spring as well. I was looking at a few different triggers. Apex, Ghost, Agency Arms, etc... Anybody have any suggestions? I don't want to get any light primer strikes. I also would like an easy install, but if a little work has to be done, I don't really mind.

Thanks!
Click to expand...

What are you trying to acomplish?
 
Polishing the end of the ramp on the crucifix and the face of the striker where they meet always does wonders for the glocks I shoot. Add a 3.5 connector and you will have a much lighter trigger without sacrificing any reliability.
 
For a few Glock trigger mods, I've only used the Kineti-Tech.com trigger shoes and I used my existing Glock trigger bars to save money, although Kineti-Tech will sell the trigger shoes mounted on a polished stock Glock trigger bar should you have more money than time.
 
You must log in or register to reply here.
Back
Top