Anschutz Savage Disassembly

[cincygunner]

I have a J.G. ANSCHÜTZ GmbH & Co. Savage Model 1515/16 .22 WMR rifle that was inherited from my father, and Grandfather before him.

Question is is there a way to disassemble the bolt assembly on these. I am able to take the stock off with the 1 screw but the trigger/bolt/barrel is 1 complete assembly and I'm not seeing how it comes apart for cleaning. I can run a rod down the barrel and wipe some things off, but I'd like to do a complete cleaning as it has not been fired in many years and I'd like to take it to the range and see how it performs.

 

[longrifles Inc]

Hey Bud,

First, for three years I worked for the Anschutz National Service Center in COS as a gunsmith. (that was nine years ago)

I'll admit that my memory is a little foggy but I think your rifle is sort of along the same bloodline as the 64 action. The vast majority of guns I worked on were late model 54's and the 2000 series square receivers which are both quite a bit different than what you have there. (target rifle stuff for ISSF)

If you can, get the bolt out of the receiver and take a couple photos of it. That would be a big help.

Chad

 

[cincygunner]

Not even really sure how to get the bolt out of the receiver. Took some pictures though.

I really don"t see a way to take it apart unless I'm supposed to punch out all the pins like on the AR-15.