I've spent quite a bit of time reading about what makes a good gun safe as I've been searching for my own, and I found that there are a lot of major phony safe manufacturers using cheap materials and using over dramatized fire ratings to have at least something to claim for their safes. They just delivered my Sturdy Safe (sturdysafe.com) Many major safe builders use 12-16 gauge outer steel which offers virtually no protection against a common axe attack. Usually adding a bit more door thickness , never the less they wouldn't stop much of an attack period, but well disguised fire ratings are used as a ruse. So, a safe with an outer thickness of of just .0589 inches (16 gauge) to .1046 inches (12 gauge) this covers the majority of gun safe outer walls including safes up to $1800-$2000 safes with plaster board, gypsum sheathing or a foamed concrete inner layer, providing not much protection.
So the reason I'm writing this is I've read so much crap recently describing these woefully inadequate safe constructs I felt . I had to speak up. I just purchased a Sturdy safe with outer walls of .1793 thick walls (7 gauge ) with a front door of 5/16" thick. The safe is also made of one sheet with 12 -90 degree bends with a recessed door . It is actually a thing of beauty in the simplicity of it's construction. For the price of this safe, I paid less than $1000 before tax and shipping( unlucky for me they are made in my state so I paid taxes. One of the reasons I am writing this is I wanted to share my good fortune upon discovering this totally made in America company. The only body welds on this safe is for the top and bottom. The safe also uses far fewer locking components as they have placed the handle on the side in direct line with the locking bolts, so no elaborate cam locking structures.
I've never written a safe review but felt this was a substantial enough find to share it with people also interested in the best protection for their firearms that they can. I just bolted mine down today, I must admit that I didn't get the fire protection ( high temperature ceramic glass wool , actually two types compressed to 2" thickness) because I live just a couple of blocks from a fire station. There is a lot more I could have written but just check it our for yourselves, and see if you find it as cool as I did. I think it is unbelievable quality for the money , and granted some have complained of its industrial look on other forums, but I just put on some decals that came with it and it actually looks kind of cool. After reading how they build their safes I kept reading all the major player specs and kept coming back to this manufacturer, and I hope this helps someone else looking for a safe.
So the reason I'm writing this is I've read so much crap recently describing these woefully inadequate safe constructs I felt . I had to speak up. I just purchased a Sturdy safe with outer walls of .1793 thick walls (7 gauge ) with a front door of 5/16" thick. The safe is also made of one sheet with 12 -90 degree bends with a recessed door . It is actually a thing of beauty in the simplicity of it's construction. For the price of this safe, I paid less than $1000 before tax and shipping( unlucky for me they are made in my state so I paid taxes. One of the reasons I am writing this is I wanted to share my good fortune upon discovering this totally made in America company. The only body welds on this safe is for the top and bottom. The safe also uses far fewer locking components as they have placed the handle on the side in direct line with the locking bolts, so no elaborate cam locking structures.
I've never written a safe review but felt this was a substantial enough find to share it with people also interested in the best protection for their firearms that they can. I just bolted mine down today, I must admit that I didn't get the fire protection ( high temperature ceramic glass wool , actually two types compressed to 2" thickness) because I live just a couple of blocks from a fire station. There is a lot more I could have written but just check it our for yourselves, and see if you find it as cool as I did. I think it is unbelievable quality for the money , and granted some have complained of its industrial look on other forums, but I just put on some decals that came with it and it actually looks kind of cool. After reading how they build their safes I kept reading all the major player specs and kept coming back to this manufacturer, and I hope this helps someone else looking for a safe.