9mm Case Length

[SAGW]

I have been reloading 9mm for a while now. As of right now the shortest case I have loaded has been .748". I haven't had any problems loading that length. Does anybody load anything shorter than that?

 

[603Country]

I've never measured a 9mm case.

 

[ka9fax]

I never measure any pistol brass, only rifle.

 

[9x45]

That'a about right on average, maybe some at .745", but it seems like only CZ's are sensitive to case length.

 

[T. O'Heir]

Nominally case length is .754". Trim-to is .750". Two thou won't make much difference though.
You have a bit of wiggle room with headspace. SAAMI shows a -.010 tolerance for case length.
http://www.saami.org/PubResources/CC_Drawings/Pistol/9mm Luger - 9mm Luger +P.pdf

 

[SAGW]

That's what I figured. I didn't think a thousandth or two would hurt. Thanks guys.