'73 Front Sight Extra Tall

[Shotgun693]

My '73 clone shoots really high at 50 yards, like about 10 to 11 inches. The back sight is bottomed out. Does anyone know where I can find a 3/8" dovetail unfinished front sight. I used to see'm on occasion, usually for a BP rifle, but can't find one right now.

 

[Scorch]

Brownells or Midway. You might as well just go ahead and get the right height front sight with a bead insert.

 

[JT-AR-MG42]

If you are partial to the Rocky Mountain front sight, you might try Dixie Gun Works.

JT

 

[Dfariswheel]

I've used the Brownell's blank front sight to build custom sights.
It blues very nicely.

http://www.brownells.com/rifle-part...ront-sight-prod55.aspx?avs|Color_1=Unfinished

Unless these have changed, the actual sight is not as rough as the picture.

 

[PetahW]

Skinner Sights also makes/sells a Patridge-type square post front sight blade of .650" height, designed to be trimmed w/o thinning.

This sight measures 1/2", side-to-side, meant to fill an entire barrel dovetail, for sights mounted directly in the bbl, ILO on a ramp.

http://www.skinnersights.com/front_sights_5.html



.