6" Barrel for Glock G20 SF

C

cmdc

New member
I can't find one. Anywhere. The only thing I can find is a 9" barrel in stock at Lone Wolf Distributors. Anyone tried one of these?
 
You will probably have to get a 6" second hand from gunbroker or an online classifieds. I would think a 9" barrel would be a bit much, but I only had a G20 for a year or so, and only had the stock barrel in it. Put about 400rss through it and couldn't shoot if for a darn. Grip was too big for my hands.

I believe

Efk fire dragon
Lonewolf
Maybe Jarvis

Makes extended barrels for your gun. I also don't know if a barrel for a gen3 will fit a gen4 or vise versa
 
I have the LW 6 and 9 inch barrel and they both shoot just fine! The 9 inch looks awkward but gives you a little more giddy up! Check out Hickok45 on youtube he shoots the 9 inch LW in a g20/
 
I have a 6" EFK barrel for my glock 20 sf but be careful--their chamber on my barrel was cut to very tight tolerances so you may need to do some polishing or reaming to get it to work reliably. I have a 5" LW 10 mm barrel as well as a 9 x 25 dillon and they both are very well cut with chambers that comfortably accomodate "common" specs for either cartridge, as well as providing full-case support for hot loads. Last time I was on their site they had good stock of all sizes of barrels--must be a recent run on them. My 9 x 25 I ordered was a 9" but you could order one and then have it cut down and either threaded, ported or have a target crown put on --which is what I did.
 
Update: I ordered an EFK 6" barrel a couple days ago. Thanks for the heads up. I also watched the Hickock45 vid on the 9"er, and I'm going to get one of those as well. It looks like a lot of fun.
 
Those 9" barrels ARE a lot of fun :D

I went with a threaded one because I've got the idea
that one could make a reverse-compensator kinda thing
that looks like its an extended slide...
kinda like the Deagle Comps do...

However, my millwork thusfar sucketh rotten eggs...LOL
but I'm still learning, training, and practicing...
maybe I'll have useful results in couple years ;)
 
What's standard g20/21 like 5.5"?
Show some pics of the 6 and 9 when u get.
I'm thinking of getting an extended for my next build with g19 and threaded.
I'll check on Hickock 45 a also- he is a great shot.
 
My EFK 6" and Lone Wolf 9" barrels will be here Friday. I'll post pics next week.
Click to expand...
Be SURE to drop test all your ammo (of each type/size) that you fire through that EFK barrel--meaning simply drop it in and it should freely "kerplunk" down into the chamber so that the base of the case web is flush with chamber face.

Speaking of 6" barrels--Glock itself makes one for the 40--and unlike the 20's it uses standard rifling that can take cast bullets. I called and asked about it in the 20--they simply replied with the standard "you modify our guns in any way that takes them out of warranty":rolleyes:
 
Last edited:
You must log in or register to reply here.
Back
Top