6.8, What do you think?

WillyKern69

New member
I have read the history on Wiki. But Could I get some feedback from shooters? Have an offer to buy one, would you? Ammo is hard to come by though.
Thanks in advance,

WK

I did a 6.8 search here and got zero:), any jumps to other threads from the mods is welcome.
 
Bolt action or semi-auto? I've been interested in the past as well on this round. Ammo is only as hard to find if you are unwilling to get into reloading. Brass will probably be the hardest thing to come by for the reloader.

IMO the 110 grain 6.8 SPC load is just a modern 7.62X39, with slightly more velocity, flatter trajectory, and hits with a little more energy than a standard 123 grain 7.62 load. There are a lot worse things to be similar to than the 7.62X39. I can see a better bullet selection for the varmint and deer hunter for the 6.8 over the 7.62X39 as well.

I may still get one in the future, I'll probably just build one on a Savage action as the Remington rifles in this chambering seem to be rare and expensive. I doubt the cartridge will ever be other than a niche cartridge, but sometimes a niche cartridge can be a lot of fun.
 
I love mine. I have made a few DZ ARs in that caliber and also 7 bolt actions. It's very impressive in the field.
 
6.8

First, thanks for input. I thought this would get no replys.:D
It is a AR platform. TaylorCE you have confirmed all I was thinking. Great round, but unavailable. Is any of the top guys making guns in this caliber? Wyosmith, tell us more, please.

WK
 
I'm building a AR upper in 6.8spc right now. I'm planning to use it for night-time hogs. If you are truely interested in this round, head over to 68forum.com, lots of info over there.
 
I own several ARs in 6.8 and its the hunting rifle of choice for my oldest daughter. It does a good job for what is was designed to do. I consider it about a 300 yard rifle for deer and hogs.

You hit on the 1 weakness this cartridge has... Ammo availability. I have bought online from Silver state Armory and have been happy with their offerings. I also have found Sellier and Belloit on the shelves at the local Cabellas as well as Hornady on the shelf at my LGS. Via my LGS, I have also purchased 200 round cases by them, ordering from their distributor without much difficulty, pre panic.

Federal is supposed to be producing a fusion round this year as well, which may help availability and perhaps lower prices. That will bring another name to the list of Remington, SSA, S&B, and Hornady offering factory loadings, that I know of (there may be others).

Thus far, my favorite hunting round is the 120 grain Hornady SST. Thus far, it has produced impressive wound channels in the 3 Texas deer it was pointed at. Each was a 1 shot kill with the bullet placed where it should have been.

Reloading would make this a more cost efficient round. I am preparing to make my first steps into metallic cartridge reloading for that primary reason. Pre panic, cost was approaching $1/round. Now, a look on Gunbroker or the ammo search bots will show upwards of $1.50/round.

There have been at least 1 bolt action made for this cartridge: a Remington 700. I've seen on Gunbroker other rifles, but all have been used and raised my suspicions that they might have been rebarrelled. In a bolt action, it would be a mild recoiling rifle with deer and hog capability, but if I were going with a bolt action rifle, there are other calibers out there that will do the job, with more ammo availability, and often with better range and performance.

If you are looking for further information on the 6.8, checkout 68forums, a board much like this dedicated to the 6.8. Lots of fanboys over there, so take your grains of salt with you.

Another round to consider if you are looking for an AR with more punch than 5.56 for deer or hog would be 6.5 Grendel. In addition to Alexander Arms and Hornady loading factory ammo, Wolf announced they would be offering steel cased loads at comparable prices to their 5.56 offerings, making for a cheap practice/plinking round, something you will not find in 6.8 SPC. It also retains velocity better beyond 300 yards if you are interested in stretching out for paper punching at longer distances.
 
Last edited:
globemaster - Remington did actually produce a 700 model in 6.8spc. I think the sub-model was LTR. They go for a big premium over a standard 700 (looking for a SA build into a 6.8 instead). I do believe that Ruger made a 77 in 6.8 as well (not 100% on that one).
 
There have been at least 1 bolt action made for this cartridge: a Remington 700

Yeah, that's why I said this. And you're right, they are uber expensive comparatively. Never quite understood that.

It's interesting you mentioned the Ruger. I never saw the 6.8 chambering in their catalog, but IIRC, one of the others I saw on GB was a Ruger. Perhaps I missed it in the catalog. Eh, no claims of perfection on my part!
 
Ammo Availability Problem?

6.8 Brass is collecting dust at Cabela's in LaVista, NE .......

....and .277 bullets are as common as budget deficits these days.

What is scarce is .22 caliber bullets ......
 
It is a great caliber for a reloader. Plenty of bullets available now. Both large and small primer brass is available which adds a little flexibility.
 
I have been following the cartridge for a few years now, and have a sort of passing interest in it. I understand that there are some chambering issues with the cartridge, IIRC, early rifles had a throat design which would cause pressure issues with it. I seem to recall that more recent iterations have the new and improved throat.

From a handloader's perspective, anytime one has to load a cartridge to near max to get acceptable performance out of it, this concerns me a little bit. But folks like the cartridge.

My question is generally, what would you do with this cartridge? Is it to be a hunting rifle? If so, there are other, more commonly available cartridges one might choose. If sort of blasting and plinking and whatnot, the 223 sure is a whole lot of fun, and less expensive (when you can find it!).
 
The 6.8 SPC

The 6.8 SPC is a fine cartridge for medium game like White Tail Deer, and other small and medium game. I taken 4 deer with it and quit pleased with all the results. I feel it is a better than the 223, 30 Blackout and the 7.62x39 and just about perfect in the AR platform.

V/R
J.Budd
 
I thought it a nice cartridge to play with in the Contender platform... factory barrels are available, & I bought a rifle length barrel... I've yet to get a good scope on the barrel... but bought 100 rounds of SSA ammo at the time I bought the barrel ( before the crunch ) just recently traded to get 150 once fired Remington cases... I have tons of .270 bullets, so once I pull the trigger on a scope, ( I need several right now, & the 6.8 barrel is 3rd or 4th on the list )
 
Make sure the gun your looking at has a Spec II chamber. If so you can get about 80A% the power of a .308 in a standard AR platform.
 
The ballistics of the 6.8 are impressive in an AR compared to the .223 but it's not common enough yet for my tastes. My .02


Boomer
 
Reynolds357 said:
I agree that it is a good Contender cartridge. Underpowered for anything that I use a bolt for.

What does Contender vs. Bolt have to do with it? You can run some pretty powerful cartridges on the Contender frame especially some of the JDJ cartridges. Plus how many people run a .223 or similar out of a bolt are those underpowered as well?

I think it would be a great bolt gun cartridge for deer sized game. Especially for people who are recoil sensitive or people with medical conditions that prohibit recoil that want to hunt. It works great in short barrel lightweight rifles and an 85 grain TSX with a MV of 3000 fps + or a 110 grain bullet at 2700 fps will get the job done quite handily without a lot of recoil. Plus it would be more than powerful enough for use on deer, pronghorn, and pigs out to 300+ yards.

When I was going to build a light weigh walking varmint rifle that was capable of using on large game in Colorado which requires a 6mm or larger bore I seriously considered the 6.8. I went with the 6X47 Rem though because it didn't require any work to the bolt face and saved me a little money in the long run. I still think of the 6.8 from time to time but haven't dropped the hammer on building one yet.
 
Back
Top