I have a HVA 1640 action and Albright trapdoor butt plate that I'm using for the basis of this build. I've already added a Dakota 3 position safety and have a Timney trigger that'll I'll be using as well in this build. I don't have a barrel yet but I'm thinking of using a M70 FWT contour barrel, and let the smith cut it back to where the rifle balances nicely. I'm hoping it'll end up somewhere between 20-22".
Here is my basic parts, disregard the Canjar SS trigger Hooligan1 talked me out of it.
Here are the three stocks I have to build my pattern with, I figure if I screw up I'll have something to start over with at least. I have about $70 invested in all three stocks. I know I'll need the barrel installed on my action before I can properly build my pattern stock.
Here is my basic parts, disregard the Canjar SS trigger Hooligan1 talked me out of it.
Here are the three stocks I have to build my pattern with, I figure if I screw up I'll have something to start over with at least. I have about $70 invested in all three stocks. I know I'll need the barrel installed on my action before I can properly build my pattern stock.