'58 Rem. Hammer Rubs left side of frame.

D

deerslayer303

New member
Hey Ya'll,

I just received my brass framed '58 Rem. from Cabelas (Pietta). I noticed that when the hammer is falling (letting it down with my thumb) as it enters the frame it rubs the left side. I checked my Uberti '58 and it does the same thing, slightly. Is this the nature of these beasts? Or Do I need to return it, for exchange? It is a wall hanger, but will be taken down whenever the mood strikes and fired. I also figure its brass frame is softer than the steel hammer and probably will clearance itself? Does you guys' '58 Repros do this?

Thoughts?
 
Some do, some don't. Stoning the side of the hammer so it doesn't do it is part of the tuning process.
 
Ok Sweet, Thanks Just more fun on the bench for me. Can you explain this process? or point me to a link? I probably won't mess with the brasser but I will do it to the shooters.
 
Another way to straighten out the hammer problem is to place a very thin shim on the pivot screw that holds the hammer in place, on the side of the hammer where it's rubbing on the frame.
By doing it that way the hammer won't move laterally along the pivot screw and begin to rub the frame again as the hammer wears at some point in the future.
This outfit sells trigger shim washer kits.

http://www.michigancenteroutdoors.com/site_map.html

Custom brass or stainless shims are available for $2 each including shipping:

http://www.michigancenteroutdoors.com/trigger_shims.html

SINGLE SHIMS AVAILABLE FOR CUSTOM ORDERS

Single Shims are available for custom orders from our inventory.
Price is $2.00 each and includes shipping.
Use the PayPal Cart to add this item, and update cart to quantity desired.
Use comments or e-mail to indicate the size & style you require.

Brass or Stainless Shims $2.00 ea Free Shipping
Click to expand...
 
Last edited:
DS303

There! There! Now See?! SEE?!

Now you are having fun!

You are getting into one of the fun parts of the lifestyle!

DOG-GONIT IT IS GREAT TO BE AN AMERICAN WHERE PEOPLE BY AND LARGE HAVE THE RIGHT ATTITUTDE TOWARD FIREARMS!
 
LOL @ Doc

Yep, I love tinkering, what better way to learn the ins and outs of something than by tearing into it? Gun Snobs annoy the crap out of me, thinking that one brand or the next should be impervious to malfunction or that NOTHING should need to be tweaked or tuned. I asked if I should return it because I didn't know if there was a common problem that slips by QA at the factory. I will bust the Uberti down and shim that hammer and while I'm in there a few things are going to get polished. THIS FORUM ROCKS!!!! What the heck did we do before the internet??
 
Packs of small brass washers can be found at Home Depot and some hardware stores.
One of these can probably be filed thinner to make a custom fit shim.
I recall shimming a hammer on a sidelock rifle using a similar washer.
 
Last edited:
One of my 3 Pietta 1858's has the same problem. Doesn't seem to affect the gun going boom, and doesn't bother me much. I wouldn't worry about it unless it is so bad that the hammer will hang on the frame when slowly de-cocking it (safety issue), or it won't reliably pop caps.
 
Same problem

I had the same problem and had some thin washers in my junk box, slid one in on the rub side and had no more issues.
 
You must log in or register to reply here.
Back
Top