44 mag Xtreme 200 g plated LOADS Please

[Emerson Biggies]

I have loaded the X-Treme 240 grain plated with 9.3 grains of Unique. It's fun and works well.

I have bought some X-Treme 200 grain plated and find there is not much published in the load dept. I tried 6.8 grains of Universal and it works fine too, but........... my supplies of Universal are limited.
Can someone suggest a load for the 200 grainer in TiteGroup, Unique, RedDot, 2400, H110, or Accurate #2???

My interests are in the 950 to 1300 FPS goals. X-treme says I can go to 1500, but have no desire to beat myself to death or abuse the gun. Thank you in advance!

 

[joneb]

2400 down loads well, you could try a bit below the starting load for 200gr jacketed.
I have load data with 2400 for 44spl, so I think you could make it work well in 44 mag.

 

[Will-j]

200gr X-treme

Try these from the HORNADY #9 Manual (200gr XTP)

STARTING LOADS:

2400/22.1 for 1300+/- (7 1/2" Redhawk)
H110/25.8 for " " "
Unique/11.4 for " "


--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
These are STARTING LOADS from the SPEER # 10 (200gr JHP)

Unique/12.3 for 1403 +/- ( 7 1/2" Super Blackhawk)
2400/22.8 for 1466 +/- "


--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Unique/7.0 gr for 906 +/- (Super Blackhawk 7 1/2")
*Red Dot/6.5* gr for 956 +/- "
AA#2/8.0 for 1020 +/- "
*AA#2/8.9* for 1146 +/- "

*These are MAX for 240gr LEAD SWC from SPEER #10 and should be
safe in your pistol.

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- * THESE ARE MAX loads from SPEER #12 Manual (200gr JHP)

*Unique/ 12.4gr* for 1399 +/- ( 7 1/2" Redhawk)
" / 11.1gr for 1299 +/- "
231-HP38/10.5gr for 1219 +/- "
* " " 11.5gr* for 1295 +/- "
2400/19.0gr for 1376 +/- "


--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

The following are from LYMAN #47 Manual//Universal Receiver w/4"
Vented barrel. * Max Load*

Unique/10.5gr for 905 200gr Hornady HP
* "" /13.2gr for 1148* "" ""
2400/19.5gr for 972 "" ""
* "" / 23.6gr for 1227* "" ""
H110/24.5gr for 1059 "" ""
* "" /29.9gr for 1378* "" ""
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
200gr Linotype #429303w/gas check *MAX*

*Unique/13.2gr* for 1265 +/-
"" /11.0gr for 1004 +/-

*2400/24.0gr* for 1314 +/-
"" /19.0gr for 991 +/-

*231/12.6gr* for 1231 +/-
"" / 9.1gr for 913 +/-

Hope these help you; Give you something to play around with.

WILL.

 

[Emerson Biggies]

I have 3 loading manuals, but evidently the wrong ones. Thank you all very much for the data. This will keep me busy for a long time.

 

[Will-j]

No Problem. Sometimes the older manuals have the info needed that's been deleted to make room for all the new stuff coming out.

You should be able to access any manual through the net for whatever info you need....I would imagine [just Google the manufacturer]...for whichever product--powder, bullets, etc. I still new to the comp. I was comp.- illiterate;
Now, just comp.-challenged.

Good Luck.
WILL

 

[joneb]

http://www.google.com/url?sa=t&rct=...=tFP_jhMyHeiY9ThXP2VGpw&bvm=bv.96952980,d.cGU
By clicking on this link you will be downloading Lyman's 48th edition.

 

[Fox84]

When loading extreme bullets, have a good flare on the case neck.