CAUTION: The following post (or a page linked to) includes or discusses loading data not covered by currently published sources of tested data for this cartridge (QuickLOAD or Gordon's Reloading Tool data is not professionally tested). USE AT YOUR OWN RISK. Neither the writer, The Firing Line, nor the staff of TFL assumes any liability for any damage or injury resulting from the use of this information.
I’m developing 32 H&R +P loads for my Blackhawk with a 6 1/2” barrel. The 2 bullet weights I’m working with are 85 and 100 grains Hornady XTP bullets.
Having reading many 32 H&R reloading articles, I’ve concluded a good load for both is 11 grains of H110. Lil’Gun is also highly recommended but Lil’Gun is unobtainium, so I’ll stick with H110 for now.
Recommendations? Thoughts? Suggestions?
I’m developing 32 H&R +P loads for my Blackhawk with a 6 1/2” barrel. The 2 bullet weights I’m working with are 85 and 100 grains Hornady XTP bullets.
Having reading many 32 H&R reloading articles, I’ve concluded a good load for both is 11 grains of H110. Lil’Gun is also highly recommended but Lil’Gun is unobtainium, so I’ll stick with H110 for now.
Recommendations? Thoughts? Suggestions?