.243 Ackley question.

S

SCOOB

Inactive
Is there really a big difference in long range accuracy potential of the Ackley .243 verses the standard .243 ?

I would like to do some reloading for accuracy but still be able to pick up a box or two of shells from the local hardware store for target shooting. I don't think you can do that with the Ackley.

Your opinions are appreciated.
 
My Ackley Imp experience is limited to two rifles, but "factory" is supposed to have a 0.004-6" crush fit in the AI chamber, and firing it gives you fireformed AI brass.
One of the reasons for the Ackley conversion's popularity is that in a pinch, "factory" stuff could be used.
My rifles give me quite decent accuracy with fireforming loads, but honestly, I've never fired a "factory" round in either! :D
 
Correct me if I'm wrong, but my understanding is that all Ackley Improved cartridges can use factory loads for both regular use and in fireforming brass for reloading.

Anytime you get higher velocity with a given bullet, the trajectory is somewhat flatter and the wind drift is less. This leads to easier hits at longer ranges.

On the theoretical no-wind day, at a known distance, the group size is less a function of the cartridge and more a function of the particular rifle. There is certainly no reason for an AI .243 to be any less accurate than "stock".

FWIW, Art
 
You must log in or register to reply here.
Back
Top