$0sw loads using Power Pistol

[Poconolg]

Is there anyone using Power Pistol with 155 165 and 170gr jacket and plated and cast bullets. Any help with loads will be helpful. Thanks

 

[rg1]

Just to add some info but check your manuals and work up.
40 S&W
165 gr. Jacketed FP--Win brass--CCI 500 primers--oal 1.125"
Power Pistol 6.5-940 fps----6.7-1010----7.0-1030----7.2-1065 fps
_________________
155 Hornady XTP-HP oal 1.125"
Power Pistol 8.0 grains---1142 fps
____________
165 Rem Golden Saber oal 1.125"
Power Pistol 7.0-1028 fps
__________-
These are the only loads I've tested in a Glock 23 with Power Pistol.

 

[serf 'rett]

link to online Alliant Load information

http://www.alliantpowder.com/reloaders/RecipeList.aspx?gtypeid=1

What does your manual(s) show you?

 

[serf 'rett]

You have asked for information over to broad a field. To many choices. You might get more responses if you told us the particular bullet(s) you are looking to load.

As an example. for 165 gr. Berry's HBFPTP, I have used R-P brass, Tula SP primers, Power Pistol at 6.8 grains with OAL of 1.120"

Another example, 180 gr. Berry's FP, R-P brass, CCI 500 primer, Power Pistol 6.5 grains, OAL of 1.120"

These work well in my IWI Jericho/BE, but that doesn't mean a thing; for your firearm will differ.